Inventory Information - How to find them in Dell PC
Start -> Programs -> Accessories -> System Tools -> System Information ->
|
 |
CPU Speed |
- System Information => System Summary => Processor => Value (....~xxxMhz"
) => xxx is the speed, such as 450Mhz for GX1
|
| IP address |
- Start -> Program -> IPFinder
- Run Command Prompt (cmd) -> type "ipconfig" to show IP Address, type "exit" to close
- My Network Places (right click) -> Properties -> Local Area Connection
-> Internet Protocol (TCP/IP) -> Properties
- System Information => Components => Network => Adapter => IP Address
|
| Hard Drive Size |
- System Information => Components => Storage => Drives => Size for Hard Disk)
- Open My Computer -> Right Click Hard Drive Icon C: -> Properties
-> Capacity is the HD Size
|
| RAM |
- My Computer (right click) -> Properties -> General -> at the
bottom of the Tab, you can see the size of RAM (the actual value
might little different than what is installed 16, 24, 32, 40,
48, 64MB.........)
- Systems Information => System Summary => Total Physical Memory
|
| PC Model |
- In front of the computer (Optiplex GX1 ...)
- Systems Information => System Summary => System Model
|
| PC S/N |
- On the side of PC ( Service Tag: ####### )
|
| Monitor Model |
- Either in front of the monitor or on the back.
|
| Monitor S/N |
- On the back of the Monitor.
|
| Circuit Number |
- Usually written on the jack where the network cable from your
computer plugs into the wall (example: L1345).
|
